| Application: | Automation Equipment |
|---|---|
| Operating Speed: | Adjust Speed, Constant Speed |
| Power Source: | AC Motor |
| Function: | Driving |
| Casing Protection: | Closed Type |
| Number of Poles: | 4poles and 2poles |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Technical Standard of Micro AC Gear Motor
Insulation resistance:under normal temperature normal humidity condition,at motor rated operation,use DC500V megger,measure the insulation resistance between the winding and casing, which should be above 100MΩ
Insulation voltage:under normal temperature normal humidity condition,at motor rated operation,apply a voltage 1.5KV(50hz/60hz) between winding and casing for 1 minute without any abnormalities.
Temperature rise:under normal load condition and rated operation, the temperature rise of the winding measured by the resistance method should be within 75K
Insulation level:F(130°C)
Overheat protection: can customize overheat protection device(automatic reset type),115°C automatic stop,85°C±15°C automatic reset
Ambient temperature:-10°C-40°C(No freezing)
Ambient humidity:below 85%(no condensation)
Micro AC Gear Motor=Micro AC Motor(Induction motor, reversible motor,torque motor)+Gearbox(Reducer)
Micro AC Motor type:
1)Induction motor, with working form,S1-continuous working;
2)Reversible motor, with working form S2-30min working;
3)Torque motor,
Motor Size:60mm,70mm,80mm,90mm,104mm,120mm
Motor Power:6w,10w,15w,25w,40w,60w,90w,120w,140w,180w,200w,250w,300w,370w,400w,750w,1.5kw
Motor Voltage:AC,1phase110v,1phase220v,1phase230v,3phase220v,3phase380v,3phase220v/380v,and other customized voltages
Motor Poles and Speed:4P,1400rpm/50Hz;1680rpm/60Hz(2P is available)
Motor accessories:electromagnetic brake,terminal box,thermally protection,fan
Output shaft:round shaft,gear shaft
Rotation direction:CW,CCW
Micro AC Motor with round shaft
| Micro AC Motor | ||||||||||||||
| Code | Size | Power | Single phase | Three phase 3 wires | Three phase 6 wires | Terminal junction box | ||||||||
| Constant speed | Speed regulation | Thermally | Brake | Damping | Thermally | Brake | Damping | Thermally | ||||||
| Brake | Damping | Brake | Damping | |||||||||||
| 2 | 60mm | 6w | × | × | × | × | × | × | × | × | × | × | × | √ |
| 3 | 70mm | 15w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ |
| 4 | 80mm | 25w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ |
| 40w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ | ||
| 5 | 90mm | 40w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ |
| 60w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 90w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 120w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 140w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 180w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 6 | 104mm | 180w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ |
| 200w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 250w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 300w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 370w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 7 | 120mm | 400w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ |
| 550w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ | ||
| 750w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
Gearbox type:GK,GS,90mm five-stage
| Gear Reducer | ||||||
| Code | Size | 10X middle gearbox | Normal type GK Gearbox | |||
| Output shaft/key width | Ratio | |||||
| 2 stage transmission | 3 stage transmission | 4 stage transmission | ||||
| 2 | 60mm | can customize round shaft Φ8/Φ10 | Φ8 milling 7, Φ10 key 4 | 2k,2.5k,3k,3.6k,4k,5k,6k,7.5k,9k,10k,12.5k,15k, 18k | 20k,25k,30k, 36k,40k | 50k,60k,75k,80k,90k,100k,120k,150k,180k,200k,250k,300k |
| 3 | 70mm | can customize round shaft Φ10/Φ12 | Φ10 key 4 | 2k,2.5k,3k,5k,6k,7.5k,9k,10k, 12.5k,15k,18k | 20k,25k,30k, 36k,40k,50k | 60k,75k,90k, 100k,120k,150k,180k,200k,250k |
| 4 | 80mm | can customize round shaft Φ10/Φ12 | Φ10 key 4 | 2k,2.5k,3k,5k,6k,7.5k,9k,10k, 12.5k,15k,18k | 20k,25k,30k, 36k,50k | 60k,75k,90k, 100k,120k,150k,180k,250k,300k |
| 5 | 90mm | can customize round shaft Φ10/Φ12/ Φ15 | Φ12 key 4 Φ15 key 5 | 2k,2.5k,3k,3.6k,5k,6k,7.5k,9k, 9.5k,10k, 12.5k | 15k,18k,20k, 25k | 30k,36k,50k,60k,75k,90k,100k, 120k,150k,180k,250k,300k,400k,500k,600k,750k |
| 6 | 104mm | can customize round shaft Φ12/ Φ15/Φ18 | Φ15 key 5 Φ18 key 6 | 2k,2.5k,3k,3.6k,5k,6k,7.5k,9k, 9.5k,10k, 12.5k | 15k,18k,20k, 25k,30k,36k, 50k | 60k,75k,90k, 100k,120k,150k, 180k,250k,300k, 400k,500k,600k, 750k |
| 7 | 120mm | can customize round shaft Φ22/ Φ25 | Φ22 key 6 | 2k,2.5k,3k,3.6k,5k,6k,7.5k,10k, 12.5k | 15k,18k,20k, 25k,30k | 40k,50k,60k,75k,90k,100k,120k,150k,180k,200k,250k |
| Right Angle Gear Reducer | ||||||
| Code | Size | Output shaft diameter | Gear Ratio | |||
| Hollow Center | Solid Center | |||||
| Standard | non-standard | Standard | non-standard | |||
| 4 | 80mm | Φ15 | × | Φ12 | × | 6k,7.5k,9k,15k,18k,23k,27k,30k, 37.5k,45k,54k,60k,75k,90k,108k, 150k,180k,225k,270k,300k, 360k,450k,540k,750k,900k |
| 5 | 90mm | Φ17 | Φ15,Φ20 | Φ15 | × | right angle center(spiral bevel gear) right angle eccentric(worm gear) 2.5k,3k,3.6k,5k,6.25k,7.5k,9k, 12.5k,15k,18k,23k,25k,31k, 37.5k,45k,50k,62.5k,75k,90k, 125k,150k,188k,225k,250k, 300k,375k,450k,625k,750k, 1000k,1250k,1500k,1875k |
| 6 | 104mm | Φ22 | Φ17,Φ20, Φ24,Φ25 | Φ22 | Φ20 | 6k,7.5k,9k,15k,18k,23k,18k,30k,37.5k,45k,54k,60k,75k,90k,108k,150k, 180k,225k,270k,300k, 360k,450k,540k,750k,900k, 1200k, 1500k,1800k,2250k |
| 7 | 120mm | Φ30 | Φ22,Φ20, Φ28 | Φ30 | Φ22 | 6k,7.5k,9k,11k,15k,18k,23k,30k,37.5k,45k,54k,60k,75k,90k,120k,150k, 180k,225k,270k,300k, 360k,450k,540k,600k,750k |
Gearbox type: Linear type gearbox,horizontal/vertical
| Motor | Linear type Reducer | ||||
| Code | Size | Linear moving speed mm/s, vertical/horizontal | |||
| round shape linear | round shap linear diameter and maximum length | square shape linear | square shape linear size and maximum length | ||
| 2 | 60mm | 4/4.8/6/6.7/8/10/12/13.4/15/16/20/24/30/33.4/40/48/60/66.8/80/96/120/ 133.6/160/200/240/300/ 334/400/480/600 | Φ14mm,500mm | 4/4.8/6/6.7/8/10/12/13.4/15/16/20/24/30/33.4/40/48/60/66.8/80/96/120/ 133.6/160/200/240/300/334/400/480/600 | £14mm,1000mm |
| 3 | 70mm | 4.8/6/6.7/8/10/12/13.4/ 16/20/24/30/33.4/40/48/60/66.8/80/96/120/133.6/160/200/240/400/480/ 600 | Φ14mm,1200mm | 4.8/6/6.7/8/10/12/13.4/ 16/20/24/30/33.4/40/48/60/66.8/80/96/120/133.6/160/200/240/400/480/ 600 | £14mm,1000mm |
| 4 | 80mm | 5/6/8.3/10/12.5/15/16.7/20/25/30/42/50/60/75/ 83.4/100/120/150/167/ 200/250/300/500/600/ 750 | Φ20mm,1200mm | 5/6/8.3/10/12.5/15/16.7/20/25/30/42/50/60/75/ 83.4/100/120/150/167/ 200/250/300/500/600/ 750 | £20mm,1000 |
| 5 | 90mm | 2.2/2.8/3.4/4.2/5.6/6.8/ 9.5/11.3/14/17/19/23/28/34/47/56.5/68/85/94/113/136/170/188/226/282/ 339/471/566/679/849 | Φ25,3000mm | 2/2.5/3/3.8/5/6/8.3/10/ 12.5/15/16.7/20/25/30/ 42/50/60/75/83.4/100/ 120/150/167/200/250/ 300/417/200/250/300/ 417/500/600/750 | £20,1000mm |
| 6 | 104mm | 2.5/3/3.6/4.6/6/7.4/10.2/12.3/15/20.4/24.5/30.6/ 37/51/61/73.5/92/102/ 122.5/147/184/204/245/ 306/368/613/735/919 | Φ25,3000mm | 2/2.5/3/3.8/5/6/8.3/10/ 12.5/15/16.7/20/25/30/ 42/50/60/75/83.4/100/ 120/150/167/200/250/ 300/417/200/250/300/ 500/600/750 | £20,800mm |
| 7 | 120mm | 10.2/14/17/21.2/25.5/ 28.3/34/42.4/51/85/102/127/141/170/204/255/ 339/424/509/707/848/ 1018/1273/ | Φ25,3000mm | 10.2/14/17/21.2/25.5/ 28.3/34/42.4/51/85/102/127/141/170/204/255/ 339/424/509/707/848/ 1018/1273/ | £20,800mm |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}