| Customization: | Available |
|---|---|
| Application: | Industrial |
| Operating Speed: | Constant Speed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Structure and working principle of servo motor:
Servo motor is one of the commonly used motor,it is a motor that absolutely obeys the command of the control signal.Before the control signal is sent, the rotor is stationary;when the control signal is sent,the rotor rotates immediately;when the control signal disappears, the rotor can stop immediately.
As a special type of motor,synchronous servo motor is different from most other motors,it is designed for precise positioning,rather than speed controlling.
80ST,220V(1PHASE,3PHASE)
110ST,220V(1PHASE,3PHASE)
Since the development of AC servo technology in the early 1980s,the technology has become increasingly mature and the performance has been continuously improved.Now it has been widely used in CNC machine tools, printing and packaging machinery,textile machinery,automatic production lines and other fields.
SG Series AC servo is a new generation of AC servo driver independently developed by our company. It mainly uses the latest 32-bit DSP as the core remote computing unit, and adopts complex programmable device EPLD and Mitsubishi intelligent power module.It has a series advantages such as high integration,small size,fast response,perfect protection, and high reliability.
Using temperature:-10ºC-55ºC
Humidity:less than 90%(No condensation)
Vibration:less than 0.5g(4.9m/s2)
Working duty:continuously
Technical parameter:
| Model | SG200 Series | ||
| Input power supply | Single phase or three phase,AC220v(-15%-20%,50/60Hz) | Three phase, AC220v(-15%-20%,50/60Hz) | |
| Use environment | Temperature | Using:0°C-55°C;Storage:-20°C-80°C | |
| Humidity | Below 90%(no condensation) | ||
| Control mode | Position control;Speed control;Torque control;Jog control | ||
| Regenerative braking | Built-in | ||
| Control characteristics | Speed frequency response | <400Hz | |
| Speed fluctuation rate | <±0.03(load 0-100);<±0.02(power -15%-10%),the value corresponds to the rated speed | ||
| Pulse frequency | ≤500kHz | ||
| Control Input | servo enable; alarm clear; ccw drive prohibited; cw drive prohibited; Deviation counter clearing/speed selection 1/zero speed clamping; Command pulse prohibited/speed selection 2 | ||
| Control output | servo is ready to output; servo alarm output; position finish output/speed arrive output ;mechanical brake output | ||
| Position Control | Input method | pulse+symbol; ccw pulse/cw pulse; 2phase A/B quadrature pulses | |
| Electronic gear | 1-32767/1-32767 | ||
| Feedback pulse | 2500lines/rotation | ||
| Protection function | Overspeed, overvoltage and undervoltage of main power supply, overcurrent, overload, braking abnormality, encoder abnormality, control power abnormality, position out-of-tolerance, etc | ||
| Monitoring function | Speed, current position, command pulse accumulation, position deviation, motor torque, motor current, linear speed, rotor absolute position, command pulse frequency, operation status, input and output terminal signal, etc | ||
AC SERVO DRIVER,M SERIES
| Model | M Series | ||
| Input power supply | Single phase or three phase 220VAC | Three phase 220VAC | |
| Control mode | Single phase or three phase full wave rectification/PWM control sine wave drive mode | ||
| Encoder feedback | 2500 lines incremental encoder,17bit,23bit absolute encoder | ||
| Pulse signal input | Direction+pulse;A/B phase orthogonal pulse;CW/CCW pulse | ||
| Differential input:500Kpps | |||
| Open collector input:200Kpps | |||
| Digital input | 8-channel digital input,which can allocate and change signals | ||
| Analog input | 2-channel analog input function | ||
| Communication interface | RS-232:applicable servo driver debugging;RS-485:applicable for customer on-site networking communication | ||
| Control mode | Position control;speed control;torque control;position/speed control;speed/torque control;position/torque control | ||
| Basic performance | Response band width:3KHz | ||
| Speed adjust range:1-8000rpm | |||
| Troque control accuraccy:±2% | |||
| Speed variation rate:≤0.5% | |||
| Soft start time setting:0-60S | |||
| Built-in function | Motor load inertia identification function,vibration suppression function,feedforward compensation function,various PID control strategies | ||
| Overtravel prevention function,emergency parking brake in case of overtravel | |||
| Electronic gear ratio function:electronic gear ratio can be set arbitrarily | |||
| 16 stage position control function,16 stage speed control function,interrupted fixed length function | |||
| Protection function | Over voltage, over current, overload,overspeed,under voltage,overheating,encoder failure,power phase loss,abnormal regenerative braking,fan failure,etc | ||
| Use environment | Temperature | Using:0°C-45°C;Storage:-20°C-85°C | |
| Humidity | Below 90%(no condensation) | ||
| Protection | IP20 | ||
| Altitude | Below 1000m | ||
| Vibration | Below 4.9m/s2 | ||
){kind=link}