| Customization: | Available |
|---|---|
| Application: | Automation Equipment |
| Operating Speed: | Adjust Speed, Constant Speed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Technical Standard of Micro AC Gear Motor
Insulation resistance:under normal temperature normal humidity condition,at motor rated operation,use DC500V megger,measure the insulation resistance between the winding and casing, which should be above 100MΩ
Insulation voltage:under normal temperature normal humidity condition,at motor rated operation,apply a voltage 1.5KV(50hz/60hz) between winding and casing for 1 minute without any abnormalities.
Temperature rise:under normal load condition and rated operation, the temperature rise of the winding measured by the resistance method should be within 75K
Insulation level:F(130°C)
Overheat protection: can customize overheat protection device(automatic reset type),115°C automatic stop,85°C±15°C automatic reset
Ambient temperature:-10°C-40°C(No freezing)
Ambient humidity:below 85%(no condensation)
Micro AC Gear Motor=Micro AC Motor(Induction motor, reversible motor,torque motor)+Gearbox(Reducer)
Micro AC Motor type:
1)Induction motor, with working form,S1-continuous working;
2)Reversible motor, with working form S2-30min working;
3)Torque motor,
Motor Size:60mm,70mm,80mm,90mm,104mm,120mm
Motor Power:6w,10w,15w,25w,40w,60w,90w,120w,140w,180w,200w,250w,300w,370w,400w,750w,1.5kw
Motor Voltage:AC,1phase110v,1phase220v,1phase230v,3phase220v,3phase380v,3phase220v/380v,and other customized voltages
Motor Poles and Speed:4P,1400rpm/50Hz;1680rpm/60Hz(2P is available)
Motor accessories:electromagnetic brake,terminal box,thermally protection,fan
Output shaft:round shaft,gear shaft
Rotation direction:CW,CCW
Micro AC Motor with round shaft
| 5 | I | K | 60 | R | A | - | A | M |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| 1 | Motor frame size | 2:60mm 3:70mm 4:80mm 5:90mm 6:104mm 7:120mm |
| 2 | Motor type | I:Induction motor R:Reversible motor T:Torque motor |
| 3 | Series | K:K Series |
| 4 | Output power(W) | 60:60w |
| 5 | R | R: with speed regulation motor; without "R" means constant speed motor |
| 6 | Motor shaft type | GN:normal type gear shaft GU:reinforced type gear shaft A:round shaft |
| 7 | Voltage poles/motor speed | A:Single-phase 110V 50/60Hz,4P,1400rpm C:Single-phase 220V 50/60Hz,4P,1400rpm S:Three-phase 220V 50/60Hz,4P,1400rpm U:Three-phase 380V 50/60Hz,4P,1400rpm Y:Three-phase 220V/380V 50/60Hz,4P,1400rpm A:Single-phase 110V 50/60Hz,2p,2800rpm C:Single-phase 220V 50/60Hz,2P,2800rpm S:Three-phase 220V 50/60Hz,2P,2800rpm U:Three-phase 380V 50/60Hz,2P,2800rpm |
| 8 | T: terminal box type F: with fan M:electromagnetic brake P:thermally |
|
| 5 | GN | 50 | K |
| 1 | 2 | 3 | 4 |
| 1 | Motor frame size | 2:60mm 3:70mm 4:80mm 5:90mm 6:104mm 7:120mm |
| 2 | Gear type | GN: normal type gear shaft GU: reinforced type gear shaft GS: GS type gear box GK: GK type gear box |
| 3 | Gear Ratio | 50: gear ratio of 1:50; X:gear ratio of 1:X |
| 4 | Bearing type | K:ball bearing |
| Motor | ||||||||||||||
| Code | Size | Power | Single phase | Three phase 3 wires | Three phase 6 wires | Terminal junction box | ||||||||
| Constant speed | Speed regulation | Thermally | Brake | Damping | Thermally | Brake | Damping | Thermally | ||||||
| Brake | Damping | Brake | Damping | |||||||||||
| 2 | 60mm | 6w | × | × | × | × | × | × | × | × | × | × | × | √ |
| 3 | 70mm | 15w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ |
| 4 | 80mm | 25w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ |
| 40w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ | ||
| 5 | 90mm | 40w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ |
| 60w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 90w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 120w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 140w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 180w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 6 | 104mm | 180w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ |
| 200w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 250w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 300w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 370w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| 7 | 120mm | 400w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ |
| 550w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | √ | ||
| 750w | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × | |||
| Gear Reducer | ||||||
| Code | Size | 10X middle gearbox | Normal type GK Gearbox | |||
| Output shaft/key width | Ratio | |||||
| 2 stage transmission | 3 stage transmission | 4 stage transmission | ||||
| 2 | 60mm | can customize round shaft Φ8/Φ10 | Φ8 milling 7, Φ10 key 4 | 2k,2.5k,3k,3.6k,4k,5k,6k,7.5k,9k,10k,12.5k,15k, 18k | 20k,25k,30k, 36k,40k | 50k,60k,75k,80k,90k,100k,120k,150k,180k,200k,250k,300k |
| 3 | 70mm | can customize round shaft Φ10/Φ12 | Φ10 key 4 | 2k,2.5k,3k,5k,6k,7.5k,9k,10k, 12.5k,15k,18k | 20k,25k,30k, 36k,40k,50k | 60k,75k,90k, 100k,120k,150k,180k,200k,250k |
| 4 | 80mm | can customize round shaft Φ10/Φ12 | Φ10 key 4 | 2k,2.5k,3k,5k,6k,7.5k,9k,10k, 12.5k,15k,18k | 20k,25k,30k, 36k,50k | 60k,75k,90k, 100k,120k,150k,180k,250k,300k |
| 5 | 90mm | can customize round shaft Φ10/Φ12/ Φ15 | Φ12 key 4 Φ15 key 5 | 2k,2.5k,3k,3.6k,5k,6k,7.5k,9k, 9.5k,10k, 12.5k | 15k,18k,20k, 25k | 30k,36k,50k,60k,75k,90k,100k, 120k,150k,180k,250k,300k,400k,500k,600k,750k |
| 6 | 104mm | can customize round shaft Φ12/ Φ15/Φ18 | Φ15 key 5 Φ18 key 6 | 2k,2.5k,3k,3.6k,5k,6k,7.5k,9k, 9.5k,10k, 12.5k | 15k,18k,20k, 25k,30k,36k, 50k | 60k,75k,90k, 100k,120k,150k, 180k,250k,300k, 400k,500k,600k, 750k |
| 7 | 120mm | can customize round shaft Φ22/ Φ25 | Φ22 key 6 | 2k,2.5k,3k,3.6k,5k,6k,7.5k,10k, 12.5k | 15k,18k,20k, 25k,30k | 40k,50k,60k,75k,90k,100k,120k,150k,180k,200k,250k |
){kind=link}